A. Krol, C.J. Sher, et al.
Surface Science
The a-SiN1.6 / a-Si interface produced by Plasma Enhanced Chemical Vapor Deposition (PECVD) has been characterized by using metal / a-SiN1.6 / a-Si / c-Si (MNSS) devices with different a-Si film thickness dα. The increase of the voltage pulse transient photocapacitance signal as a function of dα allows the separation of interface and bulk traps absorption. Using the previous EPR measurement of bulk states (6×1015cm-3) as a calibration value, a simple model gives the interface (D-) trap density located at 0.8 eV below EC, NINT = 1.5×1011cm-2, and the optical cross section σOPT=6×10-17cm2. The analysis of the MNSS complex admittance as a function of temperature and frequency gives a similar trap density 1×1011cm-2eV-1, with a capture cross section for electrons σC=4×10-15cm2. At the a-SiNx / c-Si interface the MNS photocapacitance cross section for these interface defects is apparently lower by one order of magnitude compared to that obtained for MNSS. © 1991 Elsevier Science Publishers B.V. All rights reserved.
A. Krol, C.J. Sher, et al.
Surface Science
T.N. Morgan
Semiconductor Science and Technology
John G. Long, Peter C. Searson, et al.
JES
Revanth Kodoru, Atanu Saha, et al.
arXiv